Parceval
03/12/2014, 15h43
Hello,
I have errors on my HDD from my server ks20909.kimsufi.com
Please can you change my HDD. Also I sent you two emails over the support formula but I have received no response for three days.
I have errors on my HDD from my server ks20909.kimsufi.com
Please can you change my HDD. Also I sent you two emails over the support formula but I have received no response for three days.
Code:
root@ks20909:~# smartctl -a -d ata /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-26-pve] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250410AS Serial Number: 6RYDT8JJ Firmware Version: 4.AAA User Capacity: 250.059.350.016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Dec 3 15:37:56 2014 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 23) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 57 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 162224349 9 Power_On_Hours 0x0032 043 043 000 Old_age Always - 50749 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 57 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 057 038 045 Old_age Always In_the_past 43 (0 176 62 17) 194 Temperature_Celsius 0x0022 043 062 000 Old_age Always - 43 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 068 064 000 Old_age Always - 82461893 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 19132 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 19122 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 19122 occurred at disk power-on lifetime: 41872 hours (1744 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 17 d3 2e 5b e0 Error: ICRC, ABRT 23 sectors at LBA = 0x005b2ed3 = 5975763 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 58 92 2e 5b e0 00 04:17:02.599 READ DMA EXT c8 00 08 d2 35 d7 e3 00 04:17:02.464 READ DMA 25 00 90 ba fb 63 e0 00 04:17:01.957 READ DMA EXT ec 00 00 00 00 00 a0 00 04:17:01.956 IDENTIFY DEVICE ef 03 42 00 00 00 a0 00 04:17:01.949 SET FEATURES [Set transfer mode] Error 19121 occurred at disk power-on lifetime: 41872 hours (1744 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 3f 0b fc 63 e0 Error: ICRC, ABRT 63 sectors at LBA = 0x0063fc0b = 6552587 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 90 ba fb 63 e0 00 04:17:01.180 READ DMA EXT 25 00 20 b2 38 5d e0 00 04:17:01.169 READ DMA EXT 25 00 68 42 38 5d e0 00 04:17:01.957 READ DMA EXT 25 00 08 8a 2f 5b e0 00 04:17:01.956 READ DMA EXT 25 00 10 62 2f 5b e0 00 04:17:01.949 READ DMA EXT Error 19120 occurred at disk power-on lifetime: 41862 hours (1744 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 73 92 37 e0 Error: ICRC, ABRT 15 sectors at LBA = 0x00379273 = 3641971 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 82 91 37 e0 00 03:18:40.599 READ DMA EXT 25 00 00 82 90 37 e0 00 03:18:40.579 READ DMA EXT 25 00 00 82 8f 37 e0 00 03:18:40.579 READ DMA EXT ea 00 00 11 e0 d6 a0 00 03:18:40.415 FLUSH CACHE EXT ca 00 08 0a e0 d6 ef 00 03:18:40.210 WRITE DMA Error 19119 occurred at disk power-on lifetime: 41862 hours (1744 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 5f 23 89 37 e0 Error: ICRC, ABRT 95 sectors at LBA = 0x00378923 = 3639587 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 82 88 37 e0 00 03:18:38.830 READ DMA EXT 25 00 00 82 87 37 e0 00 03:18:38.665 READ DMA EXT 25 00 00 82 86 37 e0 00 03:18:38.595 READ DMA EXT ea 00 00 1f be 05 a0 00 03:18:38.595 FLUSH CACHE EXT ca 00 08 18 be 05 e1 00 03:18:38.573 WRITE DMA Error 19118 occurred at disk power-on lifetime: 41862 hours (1744 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 3f fb 82 77 e3 Error: ICRC, ABRT 63 sectors at LBA = 0x037782fb = 58163963 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 3a 82 77 e3 00 03:18:13.736 READ DMA c8 00 00 3a 81 77 e3 00 03:18:13.574 READ DMA c8 00 00 3a 80 77 e3 00 03:18:13.565 READ DMA c8 00 00 3a 7f 77 e3 00 03:18:13.565 READ DMA c8 00 00 3a 7e 77 e3 00 03:18:13.533 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 70% 50699 - # 2 Short offline Completed without error 00% 39758 - # 3 Short offline Completed without error 00% 12131 - # 4 Short offline Aborted by host 70% 50699 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.