OVH Community, your new community space.

raid endommagé


pheneex
03/01/2015, 17h50
Oui merci j'y suis passé, mais concernant les messages "busy", faut aller trouver ailleurs ...

BBR
03/01/2015, 17h38
http://guides.ovh.com/RaidSoft
ça peut aider ^^

pheneex
03/01/2015, 17h36
root@rescue:~# fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000419c6

Device Boot Start End Blocks Id System
/dev/sda1 * 4096 20975615 10485760 fd Linux raid autodetect
/dev/sda2 20975616 975716351 477370368 fd Linux raid autodetect
/dev/sda3 975716352 976766975 525312 82 Linux swap / Solaris

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0007159b

Device Boot Start End Blocks Id System
/dev/sdb1 * 4096 20975615 10485760 fd Linux raid autodetect
/dev/sdb2 20975616 975716351 477370368 fd Linux raid autodetect
/dev/sdb3 975716352 976766975 525312 82 Linux swap / Solaris

Disk /dev/md127: 488.8 GB, 488827191296 bytes
2 heads, 4 sectors/track, 119342576 cylinders, total 954740608 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md127 doesn't contain a valid partition table

Disk /dev/md126: 10.7 GB, 10737352704 bytes
2 heads, 4 sectors/track, 2621424 cylinders, total 20971392 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md126 doesn't contain a valid partition table

- - - - - - - - - - - - - - - - - - - - - - - -

Quelles sont les commandes requises ?
J'ai un "device or ressource busy" sur sda1 et sda2

@+

pheneex
03/01/2015, 17h09
Bonjour

Quelqu'un peut-il me proposer son aide pour une reconstruction d'un raid endommagé svp ?
Mode rescue activé avec ssh ok
Je peut fournir tous screenshots pour évaluation de gravité
Joignable skype, mail, téléphone

Dispo dès maintenant, Merci