OVH Community, your new community space.

Disk Problem


vimes
13/04/2015, 11h34
My machine is :
server : 221428
eth0 IPv4 : 142.4.211.59

Code:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000c9b31

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        4096    40962047    20478976   83  Linux
/dev/sda2        40962048  1952471039   955754496   83  Linux
/dev/sda3      1952471040  1953517567      523264   82  Linux swap / Solaris
Code:
> 
smartctl -a -d ata /dev/sda                                                                                                              
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.23-xxxx-std-ipv6-64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-9YN162
Serial Number:    W1D17EMT
LU WWN Device Id: 5 000c50 049d1b902
Firmware Version: CC4H
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Apr 13 10:24:31 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  575) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 114) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   097   006    Pre-fail  Always       -       235145232
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       82
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   085   060   030    Pre-fail  Always       -       338533112
  9 Power_On_Hours          0x0032   082   082   000    Old_age   Always       -       16401
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       81
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   078   078   000    Old_age   Always       -       22
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   082   059   045    Old_age   Always       -       18 (Min/Max 13/39)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       80
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1321
194 Temperature_Celsius     0x0022   018   041   000    Old_age   Always       -       18 (0 9 0 0 0)
197 Current_Pending_Sector  0x0012   096   095   000    Old_age   Always       -       776
198 Offline_Uncorrectable   0x0010   096   095   000    Old_age   Offline      -       776
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       16369h+12m+41.638s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       205121383306997
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       158142050022780

SMART Error Log Version: 1
ATA Error Count: 22 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 22 occurred at disk power-on lifetime: 16308 hours (679 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: WP at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 78 a8 97 07 41 00   4d+23:44:29.549  WRITE FPDMA QUEUED
  60 00 08 78 29 cb 41 00   4d+23:44:28.298  READ FPDMA QUEUED
  60 00 08 48 29 cb 41 00   4d+23:44:28.298  READ FPDMA QUEUED
  60 00 08 40 29 cb 41 00   4d+23:44:28.298  READ FPDMA QUEUED
  60 00 08 38 29 cb 41 00   4d+23:44:28.298  READ FPDMA QUEUED

Error 21 occurred at disk power-on lifetime: 16307 hours (679 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00   4d+22:02:55.971  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+22:02:55.971  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+22:02:55.971  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+22:02:55.971  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+22:02:55.971  READ FPDMA QUEUED

Error 20 occurred at disk power-on lifetime: 16307 hours (679 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00   4d+22:02:43.674  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+22:02:43.436  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+22:02:43.394  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+22:02:42.629  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+22:02:41.952  READ FPDMA QUEUED

Error 19 occurred at disk power-on lifetime: 16304 hours (679 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: WP at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 10 20 65 64 41 00   4d+19:37:17.283  WRITE FPDMA QUEUED
  60 00 60 ff ff ff 4f 00   4d+19:37:16.590  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+19:37:16.573  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+19:37:16.573  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00   4d+19:37:16.573  READ FPDMA QUEUED

Error 18 occurred at disk power-on lifetime: 16301 hours (679 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00   4d+15:51:43.184  READ FPDMA QUEUED
  61 00 40 58 3c 04 41 00   4d+15:51:42.867  WRITE FPDMA QUEUED
  61 00 18 f8 8b 59 42 00   4d+15:51:42.867  WRITE FPDMA QUEUED
  61 00 10 88 c6 9b 40 00   4d+15:51:42.867  WRITE FPDMA QUEUED
  61 00 08 ff ff ff 4f 00   4d+15:51:42.866  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      8677         -
# 2  Short offline       Completed without error       00%      8673         -
# 3  Short offline       Completed without error       00%      8673         -
# 4  Short offline       Completed without error       00%      8673         -
# 5  Short offline       Completed without error       00%      6515         -
# 6  Short offline       Completed without error       00%      6512         -
# 7  Short offline       Completed without error       00%      6512         -
# 8  Short offline       Completed without error       00%      5636         -
# 9  Short offline       Completed without error       00%      5633         -
#10  Short offline       Completed without error       00%      5632         -
#11  Short offline       Completed without error       00%      1874         -
#12  Short offline       Completed without error       00%      1869         -
#13  Short offline       Completed without error       00%      1869         -
#14  Short offline       Completed without error       00%      1868         -
#15  Short offline       Completed without error       00%      1864         -
#16  Short offline       Completed without error       00%      1864         -
#17  Short offline       Completed without error       00%      1864         -
#18  Short offline       Completed without error       00%      1845         -
#19  Short offline       Completed without error       00%       649         -
#20  Short offline       Completed without error       00%       648         -
#21  Short offline       Completed without error       00%       648         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Best regards