nicobilaine
06/12/2015, 08h33
Envoyé par Sharka
Erreur d'entrée/sortie
Envoyé par Sharka
Sharka
05/12/2015, 13h22
voila le rapport : http://pastebin.com/DjKbb7jj
Sharka
05/12/2015, 13h21
voila le résultat :
Code:
root@rescue:~# fdisk -l
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 3907029167 1953514583+ ee GPT
Partition 1 does not start on physical sector boundary.
root@rescue:~# parted -l
Model: ATA ST2000DM001-9YN1 (scsi)
Disk /dev/sda: 2000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 20.5kB 1049kB 1029kB primary bios_grub
2 2097kB 21.0GB 21.0GB ext4 primary
3 21.0GB 2000GB 1979GB ext4 primary
4 2000GB 2000GB 536MB linux-swap(v1) primary
root@rescue:~# smartctl -a -d ata /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.14.32-xxxx-std-ipv6-64-rescue] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: W2F04W3V
LU WWN Device Id: 5 000c50 044af925f
Firmware Version: CC4H
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Dec 5 07:18:13 2015 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 093 093 006 Pre-fail Always - 99365528
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 148
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 13123722432
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 28907
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 146
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 151
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 2 2 26
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 052 045 Old_age Always - 38 (Min/Max 37/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 141
193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 24603
194 Temperature_Celsius 0x0022 038 048 000 Old_age Always - 38 (0 12 0 0)
197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 272
198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 272
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 28305h+23m+37.937s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3206536743942
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 208063280619131
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3355 -
# 2 Short offline Completed without error 00% 3343 -
# 3 Short offline Completed without error 00% 3343 -
# 4 Short offline Completed without error 00% 3324 -
# 5 Short offline Completed without error 00% 23 -
# 6 Short offline Completed without error 00% 11 -
# 7 Short offline Completed without error 00% 11 -
# 8 Short offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
BBR
05/12/2015, 13h05
en mode rescue tu peux faire les tests indiqués sur le 1er lien que tu as suivi
Sharka
05/12/2015, 12h25
J'ai beaucoup de : Old_age ; Pre-fail
Je dois m'inquiéter ?
Je dois m'inquiéter ?
Code:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.14.32-xxxx-std-ipv6-64-rescue] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: W2F04W3V
LU WWN Device Id: 5 000c50 044af925f
Firmware Version: CC4H
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Dec 5 06:21:20 2015 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 093 093 006 Pre-fail Always - 99332528
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 148
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 13123722327
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 28906
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 146
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 151
188 Command_Timeout 0x0032 099 098 000 Old_age Always - 2 2 26
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 052 045 Old_age Always - 38 (Min/Max 37/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 141
193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 24602
194 Temperature_Celsius 0x0022 038 048 000 Old_age Always - 38 (0 12 0 0)
197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 272
198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 272
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 28304h+37m+25.429s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3206536743942
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 208063280610469
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3355 -
# 2 Short offline Completed without error 00% 3343 -
# 3 Short offline Completed without error 00% 3343 -
# 4 Short offline Completed without error 00% 3324 -
# 5 Short offline Completed without error 00% 23 -
# 6 Short offline Completed without error 00% 11 -
# 7 Short offline Completed without error 00% 11 -
# 8 Short offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Sharka
05/12/2015, 12h15
j'ai déjà eu le problème y'a 2 3 semaine et j'ai réussis je ne sais trop comment à le faire repartir en mode rescue mais la ça revient encore.
Peut être un HDD qui va mourir ?
Peut être un HDD qui va mourir ?
BBR
05/12/2015, 11h59
mode rescue ^^
https://forum.kimsufi.com/showthread...TO-Mode-rescue
https://forum.kimsufi.com/showthread...TO-Mode-rescue
Sharka
05/12/2015, 11h54
bon j'ai testé :
ou encore un soft reboot et maintenant je peux plus me connecter en SSH
Code:
smartctl --all -T permissive /dev/sda3 smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.14.32-xxxx-grs-ipv6-64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org Short INQUIRY response, skip product id === START OF READ SMART DATA SECTION === SMART Health Status: OK Read defect list: asked for grown list but didn't get it Error Counter logging not supported Device does not support Self Test logging
Sharka
05/12/2015, 10h58
Bonjour, j'ai essayé de suivre la page suivante avant de vous contacter :
https://forum.kimsufi.com/showthread...ter-le-support
mais quand je tape la commande :
j'ai le message d'erreur suivant :
J'ai également remarqué que la commande
mais ça reste bloqué à 0%
un
par exemple me donne la meme erreur :
J'ai plus rien qui fonctionne mon site ne fonctionne plus :
j'avais un serveur teamspeak3 dessus mais il ne répond plus.
Que m'arrive t'il?
HELP
https://forum.kimsufi.com/showthread...ter-le-support
mais quand je tape la commande :
Code:
parted -l
Code:
bash: /sbin/parted: Erreur d'entrée/sortie
Code:
apt-get update
un
Code:
tail -f /var/log/fail2ban.log
Code:
bash: /usr/bin/tail: Erreur d'entrée/sortie
Code:
netstat -tap Erreur du bus
Code:
Erreur lors de la connexion à la base de données
Que m'arrive t'il?
HELP